Lavender Fields. Lavender essential oil is used in a multitude of aromatherapy treatments.
Essential oils have been used for centuries to aid in everything from stress to skin conditions. Of course, buying essential oils on a regular basis can get quite pricey. With a little bit of work and some easy to find materials, you can make your own essential oil distiller right in your own home.
Instructions
1. Take the first milk jug and drill a hole in the lid large enough to just fit the copper tubing. Drill another hole near the bottom of the jug.
2. Cut the top off the second milk jug and drill a hole in the bottom large enough to fit the copper piping through.
3. Cut the copper tubing. You will need one piece long enough to run from the kettle stopper to the first milk jug. The second piece will run from the first milk jug to the second and coil through it.
4. Coil the one piece of copper piping seven or eight times around the tennis ball can. Leave one end long enough to travel from the first milk jug to the second. The other end should be straight and left just long enough to exit the second milk jug.
5. Put the stopper in the tea kettle and poke the meat thermometer through.
6. Get a 3/4-inch (19 mm) drill bit, to drill a hole in the stopper.
7. Fill your first milk jug with your plant material and screw on the lid.
8. Put one end of the straight copper pipe through the tea kettle and put the other end through the lid of the first milk jug.
9. Take the coiled piece of copper pipe and place the long straight end into the hole at the bottom of the first jug. Place the coiled portion of the copper pipe into the second milk jug. Run the other straight end out the drilled hole. Feed enough pipe through to reach your glass container which will hold the oils produced from your essential oil distiller.
10. Seal all the openings of your essential oil distiller with sealant.
11. Fill the second jug with ice water. This will cause the vapor to condense.
12. Place the glass container under the copper pipe running out of the bottom of the second milk jug. This container will capture the essential oil once the distillation process is complete.
13. Fill the kettle with water and place it on the stove on high heat.
14. The water will begin to boil and cause steam to penetrate the plant material. This steam will, in turn, capture the essential oils. The copper piping through the ice will cool the steam and separate the oils from the water.
Tags: first milk, copper pipe, second milk, copper piping, drill hole, essential distiller, first milk second